Filter
Top Products
Operating the Engine
GENERIC,0000055 –19–11JUL06–1/1
Restart Stalled Engine
PY4001 –UN–06JUN06
A—Clutch Pedal
CAUTION: DO NOT run a cold engine at full
throttle. Engine should be kept at idling for 30
sec before the RPM is increased, this should be
strictly followed otherwise sudden acceleration
may damage the Turbocharger.
Should the engine stall when operating under load,
depress clutch (A) and restart it immediately to prevent
abnormal heat build up and continue with normal
operation or operate at slow idle for one or two minutes
before stopping.
CAUTION: Engine should not be shut off at high
RPM, deacceleration should be done slowly &
engine should be kept at idling for 15-30 sec
when the engine is stopped.
PY80265,05I0130 –19–02JUN06–1/1
Avoid Idling the Engine
PY5775 –UN–02JUN06
Allowing engine to idle at low RPM uses fuel inefficiently,
and can cause a build-up of carbon in the engine.
If tractor must be left with the engine running more than
three or four minutes, minimum engine speed should be
1200 RPM.
45-6
082206
PN=39