Filter
Top Products
Break-In Period
PY80265,05I0116 –19–02JUN06–1/1
Observe Engine Operation Closely
PY5769 –UN–02JUN06
A—Charging Indicator
B—Oil Pressure Indicator
C—Coolant Temperature Indicator
IMPORTANT: The engine is ready for normal
operation. Be extra cautious during the
first 100 hours, until you become
thoroughly familiar with the sound and
feel of your new tractor. Stay extra
attentive and alert.
Warm up tractor carefully. Check charging (A) and oil
pressure (B) warning indicator lights and coolant
temperature gauge (C).
Avoid unnecessary engine idling.
Check engine oil, coolant, and transmission/hydraulic fluid
levels frequently. Watch for fluid leaks.
NOTE: If engine oil must be added, use seasonal
viscosity grade oil. Use only lubricants meeting
specifications given in the Fuels, Lubricants, and
Coolant section.
PY80265,05I0117 –19–12SEP05–1/1
Break-In Service
IMPORTANT: Keep wheel hardware tight to avoid
tractor damage. Check wheel
hardware torque before operating,
twice during first ten hours of
operation, after fifty hours of
operation, and periodically
thereafter.
During the First 10 Hours of Operation:
Perform daily or 10 hours service. (See Service
Intervals in Lubrication and Maintenance section)
Tighten wheel hardware. (See Wheels, Tyres, and
Treads section)
After the First 50 Hours of Operation:
Tighten wheel hardware. (See Wheels, Tyres, and
Treads section)
Check alternator/fan belt tension and tighten air intake
and cooling system hose clamps
Perform 50 Hours Service
After the First 100 Hours of Operation:
Replace transmission-hydraulic filter element
Change engine oil and filter
1
After the First 1100 Hours of Operation:
Change transmission-hydraulic oil
1
See Engine Break-In Oil in Service section for additional
information.
35-1
082206
PN=32