Filter
Top Products
FIGURE 1. CENTER PANEL AND DISPLAY
OPERATING INSTRUCTIONS
CENTER PANEL
System control is provided by the electronic display located on the center panel.
The display is used to start up the five functions of the unit: the hand held shower, the fixed shower, the hydromassage
(all jets), hydromassage (pulsed jets), and the steam bath. The display is composed of clear symbols to identify the
five functions.
Starting Any Function
The mixer control valve must be ON for the functions of
the center panel to be operational. After the mixer valve
has been set and is ON, press any button to start that
function. The steam function can be ON with any other
function. Other functions can only be ON one at a time.
Pressing the OFF button turns all functions OFF.
Mixer Control
To adjust the temperature turn the mixer handle as
shown in Figure 2. When exiting the J-Allure with all
functions OFF, the mixer control must be turned to the
OFF position.
HOT
COLD
OFF
Hand Held Shower
Pressing the Hand Held Shower button once activates hand held shower and pressing a second time deactivates the
shower. Pressing the OFF button or any other button will turn the shower mode OFF.
Stationary Shower
Pressing Stationary Shower button once activates the shower and pressing a second time deactivates the shower.
Pressing the OFF button or any other button except steam will turn the shower mode OFF.
FIGURE 2. MIXER CONTROL
21
OFF BUTTONSTATIONARY SHOWER
START BUTTON
HAND HELD SHOWER
START BUTTON
PULSED JETS
START BUTTON
JETS START
BUTTON
STEAM
START BUTTON
OFF
WHIRLPOOL
BATH
R