Jacuzzi J-ALLURELuxury Bathing and Entertainment System Hot Tub User Manual


 
J-Allure
TV Installation (Units with TV)
Remove drip shield. Connect power cord, audio cable antenna/cable TV. Hook up fan power lines with red to red and
black to black wires. Tighten cable tie and cut off excess. Tighten cable tie with anchor (not supplied) to the TV power
cord. It is not necessary to attach anchor to drip shield; the cable tie and anchor are used to ensure the TV power
cord remains inside drip shield. Position the drip shield over TV and secure. Close the door and make sure the sensor
hole on the door aligns with the TV sensor. If they do not align, adjust the TV position till they are aligned. Secure
the door. Reinstall hand held shower holder if removed. Apply sealant to mounting holes if holder was removed
completely.
13
DRIP SHIELD
BEZEL
POWER, AUDIO AND
CABLE TV/ANT. CABLES
LCD TV
HEADPHONES
RED
BLACK
FAN
AUDIO
CABLE
DC POWER INPUT
CABLE TV
DRIP SHIELD
CABLE TIE
DRIP SHIELD WIRING
AUDIO CABLE
(HEADPHONE)
TO CABLE TV LINE
TV POWER CORD
ADJUSTMENT
SCREWS
(4 PER DIRECTION)
IF THE TV HAS BEEN MOVED IN SHIPPING,
LOOSEN ADJUSTMENT SCREWS AND ADJUST
THE TV SO IT IS CENTERED IN WINDOW.
TV CONNECTIONS