Filter
Top Products
35
LX Collection
E
Lift unthreaded lter
cartridge from skimmer
well.
F
If used, remove the
chemical feeder as
instructed prior to rinsing
the lter cartridges.
Rinse debris from lter
pleats on each cartridge
using a garden hose and
high pressure nozzle.
Start at the top and
work downward towards
handle. Repeat until all
pleats are clean.
G
Trapped
Air
Bubbles
Cartridge 1
Cartridge 2
Submerge both lter
cartridges in spa. Tilt
threaded end upward
to remove trapped air
bubbles, then keep
cartridges submerged to
prevent air entrapment
during installation (step
H).
H
Place each cartridge
back into skimmer
well, then rotated
each cartridge handle
clockwise to thread back
into wall tting. DO NOT
OVERTIGHTEN!
I
Install clean skimmer
bag and lter skimmer
back onto the lter cover
clips as shown (you can
ip the lter skimmer
and use the back side to
extend useage). Replace
the lter skimmer about
every three months,
depending on spa use.
J
1. Tilt lter cover back
against the spa
shell.
2. Turn power to spa
back on.
Filter
Skimmer
Skimmer
Bag