Filter
Top Products
J-200 Series
E
Lift unthreaded lter
cartridge from skimmer
well.
F
Rinse debris from lter
cartridge pleats using
a garden hose and
high-pressure nozzle.
Start at the top and
work downward to the
handle. Repeat until all
pleats are clean
Trapped
Air
Bubbles
Cartridge
G
Submerge lter cartridge
in spa. Tilt threaded
end upward to remove
trapped air bubbles,
then keep cartridge
submerged to prevent
air entrapment during
installation (step H).
(Inside Spa View)
H
Install lter cartridge
back onto wall
tting by rotating
the cartridge handle
clockwise. DO NOT
OVERTIGHTEN!
(Filter Cover Back View)
I
Install clean skimmer
bag back onto the lter
cover clips as shown.
(Inside Spa View)
J
Install lter cover by
sliding it down into
position over mating
spa retainer clips. Turn
spa power back on
after skimmer cover is
installed.
Periodically, the lter cartridge will need a more thorough cleaning to
remove imbedded oils and minerals. For this, we suggest cleaning as
illustrated in step “F”, followed by soaking the lter overnight in a plastic
container lled with a solution of water and specially formulated lter
cleanser available from your authorized Jacuzzi dealer. The average life
expectancy of each lter is approximately two years with proper care and
water quality maintenance. Replacement cartridges may be purchased
from your authorized Jacuzzi dealer.
34