J-200
To ensure optimum performance, clean and reuse the skimmer bag and
lter cartridge once a month or as necessary, depending on use.
J-210 models include lters on their footwell suction covers
(shown right) that prevent debris from entering the pump and
the massage selector(s), when operating. These lters must
remain in place to protect these components from debris
entrapment/damage. They should be cleaned every 2 months,
or when weak pump performance is observed.
These model spas are equipped with a skimmer bag and one high
performance pleated lter cartridge located under the lter cover as
illustrated below. Debris are ltered by the optional circulation pump
(when equipped) drawing water through the skimmer bag and lter
cartridge 24-hours a day, or by jets pump 1 when running a programmed
lter cycle or when manually activated by spa use. Combined, both
lters provide unsurpassed water quality by trapping surface oils and
suspended particles. The lter cartridge should be cleared once a month,
or as needed for optimum performance.
Refer to steps A-J below for complete lter cleaning/replacement
instructions.
A
DANGER: TURN POWER TO SPA OFF! TO DECREASE
NEVER OPERATE SPA WHEN FILTER IS NOT PROPERLY
INSTALLED OR IF SKIMMER ASSEMBLY IS DAMAGED OR
ALTERED!
(Inside Spa
View)
B
Lift upward on lter
skimmer cover handles
to remove it from
mating retainer clips.
(Filter Cover Back View)
C
Remove skimmer bag
from clips, then clean
out debris.
(Inside Spa View)
D
Rotate lter
cartridge handle
counterclockwise to
unthread lter cartridge
from mating wall tting.
33