Filter
Top Products
5 OPERATION
Invacare
®
TheraPure™Supine Whirlpool Tubs 24 Part No. 1167456
2. Remove and disassemble all jet assemblies.
A. Rotate each jet assembly counterclockwise and pull away from the jet casing. (Detail “A”).
B. Remove each impeller cap by rotating it clockwise (Detail “B”).
C. Remove each impeller (Detail “C”).
3. Clean the pieces with Dispatch™ Cleaner and Disinfectant. Lay the pieces in the bottom of the tub.
4. Spray all surfaces of the tub with Dispatch Cleaner and Disinfectant. Take a long handled brush and thoroughly clean the interior surfaces of the
tub and the jet casings.
5. Allow the Dispatch Cleaner and Disinfectant to sit on the surfaces for one minute.
6. Rinse all surfaces and pieces of the jet assemblies with water.
7. Use a clean towel to dry all tub surfaces.
Detail “A”
Detail “B”
Detail “C”
Jet Casing
Jet Assembly
Impeller Cap
Impeller
Impeller