Filter
Top Products
4 INSTALLATION
Invacare
®
TheraPure™Supine Whirlpool Tubs 14 Part No. 1167456
4 Installation
4.1 Preparing the Work Area
1. Carefully remove the tub from the carton and inspect for shipping damage. If damage is found, contact the carrier.
2. Remove the tub from the shipping pallet by removing the screws from the leg mounting pads.
ƽ
WARNINGS
Check all parts for shipping damage. In case of damage, DO NOT use. Contact the carrier for further instruction.
The installation area MUST be able to support the 66 pounds per square inch (45 n/cm²) load capacity of the tub. Otherwise, injury or
damage might occur.
Access for servicing the tub MUST be provided. Install the tub in a location that will permit access to the service panels, plumbing and
electrical hookup.
ƽ
CAUTIONS
DO NOT lift the tub by the plumbing.
DO NOT modify the tub in any way. Modifications to the system or any component may cause the system to malfunction and will void the
warranty.
Access for servicing the tub MUST be provided.
Follow the recommended floor plan when installing the tub. Refer to Minimum Floor Space and Clearance Requirements
on page 13.