Filter
Top Products
English-3
INTRODUCTION
Introduction
Congratulations
Thank you for purchasing a Husqvarna Walk-Behind Mower. This machine is built for the greatest efficiency
and rapid mowing primarily of large areas. Controls in one place and a transmission regulated by motion
controls contribute to the machine’s performance.
This manual is a valuable document. Following the instructions (use, service, maintenance, etc.)
can considerably increase the lifespan of your machine and even increase its resale value.
If you sell your machine, be sure to give this Operator’s Manual to the new owner.
The final chapter of this Operator’s Manual comprises a Service Journal. Ensure that service and repair
work is documented. A well kept service journal reduces service costs for the season-based maintenance
and affects the machine’s resale value. Take the Operator’s Manual along when the machine is left to the
workshop for service.
General
In this Operator’s Manual, left and right, backward and forward are used in relation to the machine’s normal
driving direction.
Driving and Transport on Public Roads
Check applicable road traffic regulations before driving and transport on public roads. If the machine is
transported, you should always use approved fastening equipment and ensure that the machine is well
anchored.
Towing
Do not tow this machine, it may cause damage to the drive system.
Do not tow any trailers, etc. with this mower. They may jackknife or overturn causing damage to the mower
and possibly serious injury to the operator.
Operating
This machine is constructed only for mowing grass on lawns and other free and level ground without
obstacles such as stones, tree stubs, etc. The machine can also be used for other tasks when equipped
with special accessories provided by the manufacturer, for which the operating instructions are provided in
conjunction with delivery. All other types of use are incorrect. The manufacturer’s directions concerning
operation, maintenance, and repairs must be carefully followed.
Lawnmowers and all power equipment, can be potentially dangerous if used improperly. Safety requires
good judgement, careful use in accordance with these instructions and common sense.
The machine must only be operated, maintained, and repaired by persons that are familiar with the
machine’s special characteristics and who are well versed in the safety instructions.
Accident prevention regulations, other general safety regulations, occupational safety rules, and traffic
regulations must be followed without fail.
Unauthorized modifications to the design of the machine may absolve the manufacturer from liability for
any resulting personal injury or property damage.