Filter
Top Products
English-47
LUBRICATION
Lubrication
Lubrication Schedule
General
Remove the ignition key to prevent unintentional movements during lubrication.
When lubricating with an oil can, it should be filled with engine oil.
When lubricating with grease, unless otherwise stated, with a high grade molybdenum disulfide grease or
another chassis or ball bearing grease offering good corrosion protection should be used.
For daily use, the machine should be lubricated twice weekly.
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. Should this
happen, attempt to clean them with spirits. If the belt continues to slip after cleaning with spirits, it must be
replaced. Gasoline or other petroleum products must not be used to clean belts.
25h1/365 50h1/52 200h 300h100h12/12
8011-681
Lubrication schedule
Lubricate with grease gun
Oil change
Filter change
Lubricate with oil can
Level check
12/12 Every year
1/52 Every week
1/365 Every day