Filter
Top Products
English-35
MAINTENANCE
Maintenance
Maintenance Schedule
The following is a list of maintenance procedures that must be performed on the machine. For those points
not described in this manual, visit an authorized service workshop. An annual service carried out by an
authorized service workshop is recommended in order to maintain your machine in the best possible
condition and to ensure safe operation.
Read Safety Instructions section “Maintenance” on page 10.
1)
First change after 8 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours.
2)
In dusty conditions, cleaning
and replacement are required more often.
3)
For daily use, the machine should be lubricated twice weekly.
4)
Performed by authorized service workshop.
z = Described in this manual
= Not described in this manual
Daily
mainte-
nance
Weekly
mainte-
nance
At
least
once
each
year
Maintenance interval
in hours
Maintenance Page Before After 25 50 100 300
Check for fuel and oil leakages -
Check the parking brake 43
z
Check the engine’s oil level (every refueling) 50
z
z
Front and rear tires: Damage, pressure 42
z
Check the fuel pump’s air filter (Kawasaki) 42
z
Check the safety system 38
z
Check/clean the engine’s cooling air intake 38
z
z
Check the cutting deck 44
z
Check underside of rear deck 44
z
Check hardware (screws, nuts, etc.) 45
z
Start the engine and blades, listen for unusual
sounds
-
Clean under the mower deck 45
z
Inspect/Replace blades
2)
46
z
Check the condition of belts, belt pulleys, etc. 43
z
Check for damage -
Thoroughly clean around the engine -
Clean around belts, belt pulleys, etc. -