Filter
Top Products
English-25
OPERATION
Gearbox
The gear drive machines have a 5-speed
gearbox. The gear shift lever is placed below
the control panel.
Only shift gear when the machine is standing
still and on level ground.
Running
1. Depress one Operator Presence Lever
and shift transmission to the desired
gear.
2. Unlock the motion control levers by
pushing the thumb latches forward.
Slowly release both motion control levers
at the same time to begin forward
motion.
3. The steering system of this mower uses
individual right and left motion control
levers on the handle bars. Squeezing the
motion control lever will reduce tension
on the wheel drive belt eliminating power
to that wheel. With the opposite wheel
still under power a turn is accomplished.
4. If the motion control lever is squeezed
even tighter the brake will be applied to
that wheel and a tighter more abrupt turn
is accomplished. Turn left by squeezing
the left hand motion control lever or turn
right by squeezing the right hand motion
control lever. If you squeeze both levers
the mower will stop.
8011-482
Gear shift lever
IMPORTANT INFORMATION
At least one of the Operator Presence
Levers must be held in, otherwise the
engine will stop.
8011-402
1. Operator Presence Lever
2. Thumb Latch
3. Motion Control Lever
4. Handle
Pistol grip with thumb latch in neutral position