Filter
Top Products
English-
5
EXPLANATION OF SYMBOLS
Symbols and decals
These symbols can be found on the Rider and in the operator’s manual.
Study them carefully so that you know what they mean.
Parking
brake
CE conformity
marking
Fuel
Choke
Slow
FastNeutral
Engine off
Oil level Cutting Height Reversing Forward
Ignition
Hydrostatic free
wheeling
Use hearing
protection
Warning
Noise emission to surroundings
in accordance with the directive
o
f the European Community.
T
he machine’s emission is
indicated in the TECHNICAL
DATA chapter and on the decal.
Warning! Rotating
blades
Warning! Risk of the
Rider overturning
Never drive directly
across a slope
Never use the Rider if persons,
especially children or pets, are
in the immediate vicinity.
Never carry passengers on
the Rider or on its tools.
Do not insert your
hands or feet under
the cover when the
engine is running.
Drive very slowly
without the cutting
unit.
Starting instructions
Read the operator’s manual
Check the engine oil level
Check the oil level in the hydrostat
Lift up the cutting unit
Put the hydrostat pedals in the neutral
position
Apply the parking brake
Use the choke if the engine is cold
Start the engine
Disengage the parking brake before
driving
Accelerator pedal forward
Neutral position
Accelerator pedal reversing
Switch off the engine and
remove the ignition cable
before carrying out repairs or
maintenance
Read the
operator’s manual.
Tyre pressure