Filter
Top Products
English-26
DRIVING
Stopping the engine
If the engine has been worked hard, it is preferable to
let the engine idle for a minute so it runs at its normal
working temperature when stopped. Avoid idling the
engine for long periods, as there is a risk of carbon
build-up on the spark plugs.
1. Lift the cutting unit with the hydraulic lifting lever.
The unit can then be secured in the raised position
if necessary by moving the mechanical lifting lever
backwards to the lock position.
If the cutting unit is left in the lower position,
the start lock circuit will prevent you starting
the engine.
2. Move the throttle control to the “MIN” position. Turn
the ignition key to “STOP”.
3. When the Rider is at a standstill apply the parking
brake by holding down the pedal and at the same
time press in the release button.
8009-536
8009-535
8009-544
8009-328