Filter
Top Products
English-24
RUNNING
Stopping the Engine
Feel free to let the engine idle a minute in
order to attain normal operating temperature
before stopping it if it has been worked hard.
Avoid idling the engine for longer periods, as
there is a risk of the spark plugs gaining a
coating.
1. Disengage the mower deck by
depressing the control.
2. Raise the mower deck by pulling the
lifting lever backward to the transport
position.
3. Move the throttle to the minimum position
(tortoise symbol). Turn the ignition key to
the stop position.
4. When the rider is standing still, activate
the parking brake by pulling the lever
backward.
5. Move the steering controls outward.
Moving by Hand
In order for the machine to be moved with the
engine turned off, the vent screws on both
hydraulic pumps must be opened 1/4-1/2 turn.
8011-510
Disengage the mower deck
8011-552
Raise the mower deck with the lifting lever
8011-507
Vent screw on the hydraulic pump
WARNING!
Make no adjustments without:
- the engine stopped,
- the ignition key removed,
- the parking brake activated.