Filter
Top Products
English-
17
PRESENTATION
Lifting Lever for the Mower Deck
The lifting lever is used to place the mower
deck in the transport position or one of the 17
different cutting height positions.
The cutting height is set by placing a peg in
the hole for the desired cutting height and the
peg is then locked on the inside (hidden in the
illustration) with the supplied pin.
1. Pull the lever backward to the locked
position to engage the transport position.
The deck is then raised.
2. Depress the lock handle, counter hold,
and move the lifting lever forward toward
the peg to engage the set cutting height.
The deck is then lowered.
3. The lifting lever can also be used to
temporarily adjust the cutting height,
such as when passing a minor bump in
the lawn.
Accessories
For mulching, there is a BioClip attachment
available. This is mounted underneath the
mower deck and comprises control plates
and BioClip blades.
8011-525
The mower deck’s lifting lever
IMPORTANT INFORMATION
In order to obtain an even cutting height it
is important that the air pressure in all
four tires is the same (1 bar).
8011-566
BioClip attachment