Filter
Top Products
English-23
RUNNING
Mowing Tips
• Localise and mark rocks and other fixed
objects in order to avoid collisions.
• Begin with a high cutting height and
reduce it until the desired mowing result
is attained.
• The mowing result will be best with a
high engine speed (the blades rotate
rapidly) and low speed (the rider moves
slowly). If the grass is not too long and
dense, the driving speed can be
increased without noticeably
depreciating the mowing result.
• The finest lawns are obtained by mowing
often. The mowing becomes more even
and the grass clippings more evenly
distributed over the mown area. The total
time taken is not increased as a higher
driving speed can be used without
poorer mowing results.
• Avoid mowing wet lawns. The mowing
result is poorer because the wheels sink
into the soft lawn, clumps build, and the
grass clippings fasten under the cowling.
• Hose beneath the mower deck with water
after each use. When cleaning, the
mower deck shall be raised into the
transport position.
• When the BioClip deck is used, it is extra
important that the mowing interval is not
too long.
WARNING!
Clear the lawn of stones and
other objects that can be
thrown out by the blades.
8011-603
Mowing patterns
WARNING!
Never drive the rider on terrain
that slopes more than 15°.
Mow slopes up and down,
never side-to-side. Avoid
sudden directional changes.