Filter
Top Products
English-
15
PRESENTATION
Adjusting the Seat
The seat can be adjusted lengthways. When
making adjustments, the lever under the front
edge of the seat is moved to the left (as seen
by the driver in the seat), after which the seat
can be moved backward or forward.
Steering Controls
The machine’s speed and direction are
continuously variable using the two steering
controls. The steering controls can be moved
forward or backward about a neutral position.
Furthermore, there is a neutral position,
which is locked if the steering controls are
moved outward.
When both controls are in the neutral position
(N), the machine stands still.
By moving both controls an equal amount
forward or backward, the machine moves in a
straight line forward or backward respectively.
In order, for example, to turn right while moving
forward, move the right control towards the
neutral position. The rotation of the right wheel
is reduced and the machine turns to the right.
Turning on the spot can be achieved by
moving one control backward (behind the
neutral position) and carefully moving the
other steering control forward from its neutral
position. The rotation direction when turning
on the spot is determined by which steering
control is moved backward behind the neutral
position. If the left steering control is pulled
backward, the machine turns to the left.
If the steering controls are in uneven
positions when standing still or do not fit in
the slots for moving the controls outward,
they can be adjusted using the adjustment
screws, not the link system, for the controls.
8011-562
Lengthways adjustment
8011-522
Steering controls
WARNING!
The machine can turn very
rapidly if one steering control
is moved much further forward
than the other.