Filter
Top Products
English-22
RUNNING
3. Select the cutting height by placing the
peg in one of the holes. Lock the peg on
the inside with the pin.
4. Press in the stop handle, counter hold,
and carefully move the lifting lever
forward from the transport position
toward the peg.
5. Engage the mower deck by pulling out
the lever.
6. The machine’s speed and direction are
continuously variable using the two
steering controls. When both controls are
in the neutral position, the machine
stands still.
By moving both controls an equal
amount forward or backward, the
machine moves in a straight line forward
or backward respectively.
In order, for example, to turn right while
moving forward, move the right control
towards the neutral position. The rotation
of the right wheel is reduced and the
machine turns to the right.
Turning on the spot can be achieved by
moving one control backward (behind the
neutral position) and carefully moving the
other steering control forward from its
neutral position.
8011-561
Cutting height selection
IMPORTANT INFORMATION
The mower deck’s anti-scalp rollers shall
be evenly adjusted.
WARNING!
Ensure that no one is near the
machine when engaging the
mower deck.
8011-510
Engaging the mower deck