Filter
Top Products
OPERATION
Husqvarna-25
Transport
The machine is heavy and can cause serious •
crushing injuries. Be extra cautious when it is
loaded on or unloaded from a vehicle or trailer.
Use an approved trailer to transport the machine. •
Activate the parking brake, turn off the fuel supply,
and fasten the machine with approved fastening
devices, such as bands, chains, or straps, when
transporting.
Do not operate this machine on public roadways.•
Check and abide by local trafc regulations before •
transporting the machine on any road.
Do not tow this machine, it may cause damage to •
the drive system.
Load the unit onto truck or trailer by driving up •
ramps of suitable strength using a slow speed. Do
not lift! The machine is not intended to be lifted by
hand.
IMPORTANT INFORMATION
The parking brake is not sufcient to lock the
machine in place during transport. Ensure that
the machine is well fastened to the transport
vehicle. Always reverse the machine onto the
transport vehicle to avoid tipping it over.
Stopping
Emergency stop
Release both hands from the operate presence levers.
When both operator presence levers return to their
upper position, the engine will quit and the mower will
stop.
Normal operating stop
Pull both drive levers rmly toward the handle •
grips to stop forward motion.
Use thumbs to lift neutral lock into the neutral •
position.
Move speed control into the start position.•
Move the throttle control to the slow position.•
Move blade engagement control to the off position.•
Set parking brake•
8062-004
Operator presence levers
8062-009
Set throttle to slow and disengage mower blades
Stopping the Engine
If the engine has been worked hard, allow it to idle a
minute in order to attain normal operating temperature
before stopping it. Avoid idling the engine for longer
periods, as there is a risk of the spark plugs fouling.
Disengage the blades by pushing the blade
engagement control down.