Filter
Top Products
OPERATION
22 - Husqvarna
IMPORTANT INFORMATION
Do not let the recoil cord snap back by itself.
This may damage the cord or the recoil starter
assembly.
8062-009
Speed control in the start position
Conrm that the speed control lever is in the start
position.
Pull the recoil starter grip slowly until you feel
compression, then pull briskly. If the engine won’t start
in three pulls, open the choke and try again.
Warm engine momentarily, then disengage the choke
until engine runs smoothly.
8062-006
Recoil starter grip
8062-005
Parking brake
Release the parking brake by pivoting the pedal back
and downwards until it clears the brake shaft.
WARNING!
Do not run the engine indoors, in
enclosed or poorly ventilated spaces.
Engine exhaust fumes contain
poisonous carbon monoxide.