Husqvarna 965030296 Chainsaw User Manual


 
English – 59
Assembly
!
WARNING!
Ensure that the spring does not
fly out and cause personal injury!
If a new spring is to be fitted, position in its
security/holder so that the eye is over the
stud in the starter cover.
Slide in the spring and remove the security/
holder.
If a new cord is to be fitted, put the free end in the hole on the starter pulley. Grip the end using long
nosed pliers and pull the cord through.
36 and 41.
Screw the cord to the starter
pulley.
Secure the cord on the
starter pulley.
Knot the cord on the starter
pulley.
61, 268, 272, 281 and 288.
42, 242, 246, 51, 55, 254,
257,262, 394 and 3120.
Continues on next page.
STARTER
Eng, p 40-82 96-09-13, 10.2159