Filter
Top Products
42 – English
Chain brake
3120 continues on next page.
Place the clutch cover in a vice with the jaws
positioned as shown below and release the
tubular pin B.
Carefully knock out the tubular pin B.
All saws except 3120
3120
!
WARNING!
If the clutch cover slides out of
the vice's grip the spring can fly
out with immense force resulting
in personal injury!
Wear protective glasses!
Dismantling
Loosen the screw on the hand guard and
screw back 2 turns.
Gently hit the screw so that the threaded part
of the bushing can be removed.
Dismantle the other part of the bushing by
means of a punch.
Remove the cylindrical pin A.
Slide the hand guard forwards so that the
brake is actuated.
Dismantle the clutch cover and clean. See
the operating instructions.
Remove the cover on the chain brake spring.
The cover has 4 or 5 screws.
Continues on next page.
SAFETY EQUIPMENT
B
A
!
WARNING!
If the brake is not 'on', the spring
can fly out resulting in personal
injury.
Wear protective glasses!
Eng, p 40-82 96-09-13, 10.1442