Filter
Top Products
English-45
MAINTENANCE
Replacing the blade units
There are three blade units on the blade disc. Each
unit consists of a screw, a blade and a lock washer.
Always replace all three blade units at the same time,
to obtain a balanced mowing system.
1. Set the main switch to the OFF position.
2. Wear protective gloves.
3. Turn the Auto Mower upside down.
4. Rotate the skid plate so that its holes align over
the blade unit screws.
5. Unscrew the blade unit.
Use a straight slot or cross-tip screwdriver.
6. Pry apart the skid plate and blade disc a little and
remove the blade unit.
7. Fit the new balde unit.
WARNING
Always use original blade units when
replacing.
Only replacing the blade and reusing the
screw and washer, can result in the
screw wearing during mowing and
shearing off. The blade can then be
thrown causing serious injury.
3012-259
OFF
3012-288
3012-272
3012-260