Filter
Top Products
4
SAFETY INSTRUCTIONS
GLOVES
Gloves should be worn when necessary,
e.g., when fitting cutting attachments.
HEARING PROTECTION
Wear hearing protection that provides
adequate noise reduction.
EYE PROTECTION
Always wear approved eye protection. If
you use a visor then you must also wear
approved protective goggles. Approved
protective goggles must comply with
standard ANSI Z87.1.
BOOTS
Wear sturdy, non--slip boots.
CLOTHING
Wear clothes made of a strong fabric and
avoid loose clothing that can catch on
twigs and branches. Always wear heavy ,
long pants. Do not wear jewelry, shorts
sandals or go barefoot. Secure hair so it is
above shoulder level.
Personal protective equipment
WARNING: Listen out for warn-
ing signals or shouts when you are
wearing hearing protection. Always
remove your hearing protection as
soon as the e ngine stops.
IMPORTANT! Whenever you use a lawn
edger, you must wear personal protective
equipment that is approved by the authori-
ties. Personal protective equipment does
not eliminate the risk of accidents, but it
can reduce the effects of an injury in the
event of an accident. Ask your dealer for
help when choosing protective equipment.
FIRST AID KIT
Always have a first aid kit nearby .
Machine’ s safety equipment
This section describes the machine’s safe-
ty equipment, its purpose, and how checks
and maintenance should be carried out to
ensure that it operates correctly. See the
“Know your trimmer ” section to locate
where this equipment is positioned on your
machine.
The life span of the machine can be reduced
and the risk of accidents can increase if
machine maintenance is not carried out
correctly and if service and/or repairs are not
carried out professionally . If you need further
information please contact your nearest ser-
vicing dealer .
Throttle lock
The throttle lock is designed to prevent ac-
cidental operation of the throttle control.
When you press the lock (A) (i.e. when you
grasp the handle) it releases the throttle
control (B). When you release the handle
the throttle control a n d the throttle lock both
move back to their original positions. This
movement is controlled by two independent
return springs. This arrangement m eans
that the throttle control is automatically
locked at the idle setting.
Stop switch
Make sure the engine stops when you push
and hold the stop switch.
W ARNING: Never use a machine
that has faulty safety equipment!
Carry out the inspection, mainte-
nance and servic e routines listed in
this section.
A
B