Filter
Top Products
3
KEY TO SYMBOLS
Other symbols/decals on the machine
refer to special certification requirements
for certain markets.
Stop the engine by pushing
and holding the stop switch
in the STOP position until the
engine stops before carrying
out any checks or maintenance.
Regular cleaning is required.
Visual check.
Approved eye protection must
always be used.
Symbols
WARNING: This edger can be
dangerous! Careless or incorrect
use can result in serious or fatal
injury to the operator or others.
Please read the operator’s manual
ca re fu ll y an d make sur e you
understand the instructions
before using the machine.
Always wear:
S A protective helmet where there
is a risk of falling objects
S Hearing protection
S Approved eye protection
Max. speed of output shaft, rpm
Watch out for thrown objects
and ricochets.
Warning for rotating blade.
Keep hands and feet clear.
WARNING: The blade continues to
rotate even after the engine has
stopped.
When the engine has stopped,
stop the blade from rotating
by letting the blade come in
contact with the ground.
Indicates the direction of rotation.
The operator of the m achine
must ensure that no persons
or animals comes within a
15 metre radius while working.
Arrows which show limits for
handle positioning.
Always wear approved protective
gloves.
Wear sturdy, non--slip boots.