English---2
545133423 Rev. 4 9/6/07
CONTENTS
Contents
Introduction 2...................
Key to symbols 3..................
Safety instructions 4...............
Description 6.....................
Fuel handling 11....................
Start and stop 12...................
Using the blower 13.................
Maint enance 16....................
Technical data 19...................
WARNING: Under no circum-
stances may the design of the
machine be modified without the
permission of the manufacturer.
Always use genuine accessories.
Non--authorized modifications
and/or accessories can result
in serious personal injury or the
death of the operator or others.
Your warranty may not cover
damage or liability cau sed by the
use of non--authorized accesso-
ries or replacement parts.
Note the following before
starting:
Husqv arna AB has a policy of continuous
product development and therefore
reserves the right to modify the design and
appearance of products without prior
notice. Long--term exposure to noise can
result in permanent hearing impairment.
Always use approved hearing protection.
This operator’s manual descr ibes in detail
how to use and service the blower and
how to carry out regular maintenance. It
also describes which measures should be
taken to achiev e maximum safety while
operating the blower , how the safety de-
vices work and how they should be ser-
viced.
Note! The section of the manual that deals
with saf ety, must be read and unders tood
by all persons who come in contact with
the blower.
This operator’s manual has been written
for those who need guidance when it
comes to fault tracing, thorough servicing
and carr ying out cor rective maintenance of
the blower.
There are war ning symbols on the blower.
Should any of the warni ng symbo ls on the
blower become disf igured or worn, new ones
should be or dered and fitted to the blower as
soon as possible. Not e that so me of the
warning symbols may be molded in cert ain
components of the blower.
The blower is used for blowing away
leaves and other debris on the ground.
When operating the blower, the operator
must stand with both feet firmly on the
ground.