Filter
Top Products
GENERAL SAFETY PRECA
UTIONS
English
–
7
Bef
ore using a new chain saw
•
Please read this manual carefully.
• Check that the cutting equipment is correctly fitted and
adjusted. See instr
uctions under the heading Assembly.
• Refuel and start the chain saw. See the instructions
under the headings Fuel Handling and Starting and
Stopping.
• Do not use the chain saw until sufficient chain oil has
reached the chain. See instr
uctions under the heading
Lubricating cutting equipment.
• Long-term exposure to noise can result in permanent
hearing impair
ment. So always use approved hearing
protection.
Impor
tant
Always use common sense
It is not possib
le to cover every conceivable situation you can
face when using a chain saw. Always exercise care and use
your common sense. Avoid all situations which you consider
to be beyond your capability. If you still feel uncertain about
operating procedures after reading these instructions, you
should consult an expert before continuing. Do not hesitate
to contact your dealer or us if you have any questions about
the use of the chain saw. We will willingly be of service and
provide you with advice as well as help you to use your chain
saw both efficiently and safely. Attend a training course in
chain saw usage if possible. Your dealer, forestry school or
!
W
ARNING! Under no circumstances may
the design of the machine be modified
without the permission of the manufacturer.
Always use genuine accessories. Non-
authorized modifications and/or
accessories can result in serious personal
injury or the death of the operator or others.
Your warranty may not cover damage or
liability caused by the use of non-
authorized accessories or replacement
parts.
!
W
ARNING! A chain saw is a dangerous tool
if used carelessly or incorrectly and can
cause serious, even fatal injuries. It is very
important that you read and understand the
contents of this operator’s manual.
!
W
ARNING! The inside of the muffler contain
chemicals that may be carcinogenic. Avoid
contact with these elements in the event of
a damaged muffler.
!
W
ARNING! Long term inhalation of the
engine’s exhaust fumes, chain oil mist and
dust from sawdust can represent a health
risk.
!
W
ARNING! The ignition system of this
machine produces an electromagnetic field
during operation. This field may under
some circumstances interfere with
pacemakers. To reduce the risk of serious
or fatal injury, we recommend persons with
pacemakers to consult their physician and
the pacemaker manufacturer before
operating this machine.
IMPOR
TANT!
The machine is only designed for cutting wood.
You should only use the saw with the bar and chain
combinations w
e recommend in the chapter
Technical
data.
Never use the machine if you are fatigued, while under the
influence of alcohol or drugs
, medication or anything that
could affect your vision, alertness, coordination or
judgement.
Wear personal protective equipment. See instructions
under the heading P
ersonal protectiv
e equipment.
Do not modify this product or use it if it appears to have
been modified by others
.
Never use a machine that is faulty. Carry out the checks,
maintenance and service instructions described in this
manual. Some maintenance and service measures must
be carried out by trained and qualified specialists. See
instructions under the heading Maintenance.
Never use any accessories other than those
recommended in this man
ual.
See instructions under the
headings Cutting equipment and Technical data.
CAUTION! Always wear protective glasses or a face visor
to reduce the risk of injury from thrown objects. A chain
saw is capable of throwing objects, such as wood chips,
small pieces of wood, etc, at great force. This can result in
serious injury, especially to the eyes.
!
WARNING! Running an engine in a confined
or badly ventilated area can result in death
due to asphyxiation or carbon monoxide
poisoning.
!
WARNING! Faulty cutting equipment or the
wrong combination of bar and saw chain
increases the risk of kickback! Only use the
bar/saw chain combinations we
recommend, and follow the filing
instructions. See instructions under the
heading Technical data.