Filter
Top Products
KEY
T
O SYMBOLS
2
–
English
Symbols on the mac
hine:
W
ARNING! Chain saws can be
dangerous! Careless or improper use
can result in ser
ious or f
atal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure y
ou understand
the instructions before using the
machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
Both of the operator
′
s hands must be used
to oper
ate the chain sa
w.
Never operate a chain saw holding it with
one hand only
.
Never let the guide bar tip come in contact
with an
y object.
W
ARNING! Kickback may occur when the
nose or tip of the guide bar touches an
object, and cause a lightning f
ast re
verse
reaction, kicking the guide bar up and
towards the operator. May cause serious
personal injury.
If your machine bears this symbol it
is equipped with a catalytic
con
verter.
Other symbols/decals on the mac
hine refer to special
certification requirements f
or certain markets.
Symbols in the operator’
s manual:
Switch off the engine b
y moving the
stop switch to the ST
OP position before
carrying out any checks or
maintenance.
Always wear approved protective
glo
v
es.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
wo
r
n.
Refuelling.
Filing with oil and adjusting oil flow.
The chain brake must be engaged
when the chain sa
w is star
ted.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning f
ast
re
verse reaction, kicking the guide bar
up and towards the operator. May cause
serious personal injury.