Filter
Top Products
20
HUSKY 1550
PROBLEM OR CONCERN POSSIBLE CAUSE SOLUTION
Leaking water from bottom
of unit
Manifold Assembly is leaking
water
Remove the front cover of the unit. If there is
water leaking anywhere from the Manifold
please contact us at:
customerservice@huskypowerwasher.com
or order a replacement directly online at:
www.huskypowerwasher.com.
Pump housing is leaking water Email us at:
customerservice@huskypowerwasher.com
for assistance.
Low pressure Faucet not fully open or unit is
not receiving a full volume of
water
Open the faucet all the way.
Not building maximum
pressure
Screen Filter is clogged Clean the Screen filter as instructed in the
section 6.4.
Irregular pressure
Gun or Hose failure Replace Gun and/or Hose. Contact us at:
customerservice@huskypowerwasher.com
or order online at:
www.huskypowerwasher.com
Kink in the Garden Hose or Hose
is wrapped on a storage wheel
Unwrap the Garden Hose and lay it out flat to
ensure that there are no kinks in the Hose.
Water leaking from either Hose
or Unit
Stop water from leaking before using the unit or
contact us if you need assistance.
Garden Hose length is too long Shorten the length of the Garden Hose.
We recommend a maximum length of 25 to 50
feet for City water supply and 30 feet for Well
water supply.
Clogged Nozzle Clean the Nozzle as instructed in section 6.2.
Air in Pump Let Pressure washer run with Gun trigger depressed
and Wand removed until a steady stream of water
is released.
No Wand attached to the front
of the Gun
Attach
Click-N-Clean
TM
Wand to the front of the
Gun. (High Pressure is created with the Wand
and not the Gun).
No water coming out of
Wand
Clogged Nozzle Clean Nozzle as instructed in section 6.2.
Sceen Filter is clogged Clean the Sceen filter as instructed in section 6.4.
Kink in the Garden Hose or Hose
is wrapped on a storage wheel
Unwrap the Garden Hose and lay it out flat to
ensure that there are no kinks in the Hose.