Filter
Top Products
485101MT210999A
Continued.
- Replace fuel tank and container caps securely.
- Replace faulty exhaust mufflers.
Always ensure that the mower is in a safe operating condition. Frequently check all nuts,
bolts and screws for tightness. Use only genuine Hayter replacement parts.
A damaged cutterbar or loose fixing screws are major hazards. Before use, visually inspect
the cutting mechanism to ensure that it is in good condition. A damaged cutterbar must be
replaced immediately with a genuine Hayter replacement part. A cutterbar which is slightly
worn can be re-sharpened. Ensure that both cutting edges are re-sharpened equally to main-
tain balance. An unbalanced cutterbar may cause serious damage to your machine.
Refer to “Maintenance”.
Operation:
Do not operate the engine in a confined space where dangerous carbon monoxide fumes can
collect.
Always pull the starter cord slowly until resistance is felt. Then pull the cord rapidly to avoid
kickback and prevent hand or arm injury.
Mow only in daylight or good artificial light.
Avoid using the mower on wet grass, where feasible.
Always be sure of your footing on slopes.
Walk, never run.
Mow across the face of slopes, never up and down.
Exercise extreme caution when changing direction on slopes.
Do not mow excessively steep slopes.
Use extreme caution when reversing or pulling the mower towards you.
Stop the engine if the mower has to be tilted for transportation when crossing surfaces other
than grass and when transporting the mower to and from the area to be mowed.
Never operate the mower unless the guards are securely in position and in good condition.
SAFETY PRECAUTIONS
1.6
1.6
SAFETY PRECAUTIONS