Hayter Mowers 48ST Lawn Mower User Manual


 
485101MT210999A
The grassbag is designed to collect grass clippings.
For optimum performance, mow in dry conditions with the
throttle control set at fast.
WARNING - PREVENT ACCIDENTS: ALWAYS check
the condition of the grassbag for signs of damage and
ensure the rear deflector is positioned correctly on top of
the grassbag. Replace a damaged grassbag immediately.
DO NOT operate the mower with a damaged grassbag.
ALWAYS stop the engine and disconnect the spark plug
lead before attempting to remove a grass blockage.
Ensure the rear grass deflector is sitting on the grassbag
correctly.
Grassbag attachment: Raise the rear deflector. Lower the
grassbag through the handlebar and hook in position behind
the deflector springs. Lower the grassbag to rest against the
rear of the mower. Finally, lower the rear deflector to rest
against the top of the grassbag.
Grassbag removal: Raise the rear deflector and lift the
grassbag through the handlebar. Finally lower the rear
deflector to rest against the rear of the mower.
Grassbag emptying: To empty the grassbag, pour out the
grass clippings and shake the grassbag vigorously to clean
the airways. Good grass collection depends on good air
flow through the grassbag. When collecting grass clippings
it is important that the grassbag is emptied regularly to pre-
vent blockages and engine overloading.
OPERATING THE MOWER
1.20
1.20
MOWING WITH GRASS COLLECTION
CS007
CS010
CS017