Filter
Top Products
485101MT210999A
Check blade brake / clutch controls: Operate the blade
stop lever (A) several times, to ensure the lever moves
freely. Hold the lever against the handlebar in position (1)
and check that it returns to position (2) when released.
Use the right hand to hold the blade stop lever against the
handlebar (1) and use the left hand to push the blade clutch
lever (B) to the ‘engaged’ position (3). Remove the left
hand and the blade clutch lever should return to position (4),
leaving the blade drive clutch engaged.
Remove the right hand and check that the blade stop lever
automatically returns to position (2). There should be an
audible ‘clunk’ to indicate that the blade drive clutch has
disengaged.
Check throttle lever operation: Operate the throttle lever
several times and ensure that the cable moves freely whilst
operating the engine throttle mechanism. Slight resistance
should be felt when the lever moves to the ‘choke’ position.
Check ground drive clutch lever operation: Operate the
clutch lever several times and ensure that the cable moves
freely.
ASSEMBLY INSTRUCTIONS
1.13
1.13
ASSEMBLING THE MOWER FOR THE FIRST TIME
Continued.
CS050
STOP
CS051
CS047
1
2
A
CS048
1
B
3
4
A
CS049
1
B
4
2