Hayter Mowers 48ST Lawn Mower User Manual


 
485101MT210999A
To mow without collecting the grass clippings, remove the
grassbag and operate the mower with the rear deflector in its
lowest position.
WARNING - PREVENTACCIDENTS: ALWAYS check
the condition of the rear deflector for signs of damage
and ensure it is positioned correctly on the rear of the
mainframe. Replace a damaged rear deflector immedi-
ately. never operate the mower with a damaged rear
deflector.
Areas of heavy growth should be mown without grass col-
lection. If grass collection is required, first mow the area
without grass collection at the maximum height of cut set-
ting. Allow the grass clippings to dry out and then mow the
area at the maximum height of cut setting with the grassbag
fitted. Reduce the height of cut and mow the area again as
necessary until the required finish is obtained.
Set the mower to its maximum height of cut to protect the
cutting mechanism when moving the mower over surfaces
other than grass.
WARNING - PREVENT ACCIDENTS : ALWAYS
disengage the cutterbar drive and push the mower
carefully at slow walking speed when moving the mower
over non-grassed areas.
OPERATING THE MOWER
1.21
1.21
MOWING WITHOUT GRASS COLLECTION
HEAVY GROWTH
MOVING THE MOWER ACROSS NON-GRASSED AREAS
CS029