SKU 91959 For technical questions please call 1-800-444-3353 PAGE 8
CALIFORNIA PROPOSITION 65 WARNINGS
1. WARNING! Operation of this Cultivator and/or Engine exhaust from this
product contains chemicals known to the State of California to cause cancer,
birth defects, or other reproductive harm.
(California Health & Safety Code 25249.5, et seq.)
1. WARNING! The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that may occur. The
operator must understand that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
OWNER/OPERATOR PRECAUTIONS
ASSEMBLY INSTRUCTIONS
NOTE: For additional references to the parts listed in the following pages, refer to the
Assembly Diagram on page 14.
1. Prior to use, the Lower Handle (65) must be attached to the Housing (13). To
do so, align the mounting holes at the bottom (on each side) of the Lower Handle
with the mounting holes located on each side of the Housing. Then use four
Bolts (64), four Washers (26), and four Self-Lock Nuts (27) to secure the Lower
Handle to the Housing. (See Figure A.)
LOWER HANDLE
(65)
LOWER HANDLE
(65)
UPPER HANDLE
(66)
UPPER HANDLE
(66)
GRIP
HANDLE
(67)
GRIP
HANDLE
(67)
BOLT (64)
WASHER (26)
SELF-LOCK NUT (27)
BOLT (64)
WASHER (26)
SELF-LOCK NUT (27)
FIGURE A