Filter
Top Products
SKU 91959 For technical questions please call 1-800-444-3353 PAGE 11
To Stop The Cultivator:
1. Release your grip on the Clutch Handle (73), and allow it to return to its “NEU-
TRAL” position. (See Figure D.)
2. Turn the Throttle Control (71) to its “STOP” position.
3. Close the Fuel Valve on the Engine.
4. NOTE: Always park the Cultivator on a firm and level surface away from all
flammable materials such as leaves, brush, weeds, etc.
12. Always keep a safe distance away from the edges and banks of ditches and avoid
any actions that might cause the Cultivator to topple over.
INSPECTION, MAINTENANCE, AND CLEANING
1. CAUTION! Always make sure the Engine’s Throttle Control (71) is in its
“STOP” position. Disconnect the spark plug wire from the Spark Plug. And
allow sufficient time for the Engine to completely cool before performing
any inspection, maintenance, or cleaning on the Cultivator and/or Engine.
2. Before each use, inspect the general condition of the Cultivator. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts, and
any other condition that may affect its safe operation. If a problem occurs, always
have the Cultivator immediately checked out by a
qualified service technician
before further use. Do not use damaged equipment.
CLUTCH HANDLE (73)
THROTTLE CONTROL (71)
OUTER/INNER TINES
(37, 50, 40)
FIGURE D
UPPER HANDLE (66)