Filter
Top Products
Page 20For technical questions, please call 1-800-444-3353.SKU 67255
Cleaning, Maintenance, and
Lubrication Schedule
Note: This maintenance schedule
is intended solely as a general
guide. If performance decreases
or if equipment operates unusually,
check systems immediately. The
maintenance needs of each piece
of equipment will differ depending
on factors such as duty cycle,
temperature, air quality, and other
factors. If you have doubts about your
ability to safely service this tool, have
equipment instead.
Note: These procedures are in addition to
the regular checks and maintenance
explained as part of the regular
operation of the engine and
equipment.
Weekly Maintenance:
Clean Guide Bar and turn over.a.
Deburr Guide Bar following b.
manufacturer’s instructions.
Check Chain Sprocket for wear or c.
damage.
Monthly Maintenance:
If Damaged:
Replace Guide Bar if it becomes a.
bent or damaged.
Sharpen or replace Saw Chain.b.