Harbor Freight Tools 67255 Chainsaw User Manual


 
Page 11For technical questions, please call 1-800-444-3353.SKU 67255
Front Handle Guard - A guard that 6.
protects your hand on the Front
Handle from the Saw Chain.
Chain Guide Bar - A solid railed 7.
structure that supports and guides
the Saw Chain.
Kickback - The backward or upward 8.
motion, or both of the Guide Bar,
occurring when the Saw Chain near
the nose of the top area of the Guide
Bar contacts any object such as a log
or branch, or when the wood closes
in and pinches the Saw Chain in the
cut.
Kickback, Pinch - The rapid pushback 9.
of the saw which can occur when
the wood closes in and pinches the
moving saw chain in the cut along the
top of the Guide Bar.
Kickback, Rotational - The rapid 10.
upward and backward motion of
the saw which can occur when the
moving Saw Chain near the upper
portion of the nose of the Guide Bar
contacts an object, such as a log or
branch.
11.
that complies with the kickback
performance requirements of ANSI
B175.1-1991 when tested on a
representative sample of chain saws.
12.
prevents the unintentional operation
of the Trigger Switch until manually
activated.
Normal Cutting Position - Those 13.
positions assumed in performing the
bucking and felling cuts.
Notching Undercut - A notch cut in a 14.
tree that directs the tree’s fall.
15.
Guide Bar and Saw Chain.
Rear Handle - The support handle 16.
located at or toward the rear of the
saw.
Reduced Kickback Guide Bar 17.
- A Guide Bar which has been
demonstrated to reduce kickback

Replacement Saw Chain - A chain 18.
that complies with the kickback
performance requirements of ANSI
B175.1-1991 when tested with

the ANSI performance requirements
when used with other saws.
Saw Chain - A loop of chain having 19.
cutting teeth, that cut the wood, and
that is driven by the motor and is
supported by the Guide Bar.
Spiked Bumper (Spike) - The pointed 20.
tooth or teeth for use when felling or
bucking to pivot the saw and maintain
position while sawing.
Trigger Switch - A device that when 21.
operated will complete or interrupt an
electrical power circuit to the motor of
the Chain Saw.