Filter
Top Products
14
INSTALLING THE MULCHING PLUG (FOR MULCHING OPERATION) (See Figure 4)
NOTE: When using the mulching plug, do not install the grass catcher.
• Remove key and battery pack.
• Lift and hold the rear discharge door.
• Grasp the mulching plug by its handle and insert it at a slight angle, as shown.
• Push the mulching plug securely into place.
• Lower the rear discharge door.
• Reinstall key and battery pack when you are ready to mow.
ASSEMBLY INSTRUCTIONS
Fig. 4
Rear discharge openingMulching plug
Rear discharge door