Filter
Top Products
4. Figure 4
Insert the bottom wire of each Safety Guard
(Parts List Item #3) through the hole on the
burner post. Connect the Safety Guards
together. See Fig. 4.
REFLECTOR
WARN ING
Any Safety Guard or other protective
device removed for servicing the patio
heater must be replaced prior to operat-
ing the patio heater.
5. Attach the Cylinder Access Door (Parts List
Item #7) to the patio heater base.
See Fig. 5.
BURNER
ASSEMBLY
BASE_
GRID
SAFETY
GUARD
Figure 5
REFLECTOR
\
SAFETh
GUARD
EMITTER
GRID
BURNER
ASSEMBLY
CYLINDER
ACCESSDOOR ///-
BASE