Filter
Top Products
Part No. 82799 Genie DPL Super Series 3
Operator’s ManualSecond Edition • First Printing
Maximum capacity - DPL-35S
ANSI and CE 600 lbs 272 kg
CSA 500 lbs 227 kg
Maximum occupants 2
Do not operate the machine near drop-offs, holes,
bumps, debris, unstable or slippery surfaces or
other possible hazardous conditions.
Do not alter or disable machine components that in
any way affect safety and stability.
Do not replace items critical to stability with items
of different weight or specification. Use only Genie
authorized replacement parts.
When moving the machine with a forklift or other
transport vehicle, the platform should be fully
lowered, the guard rails should be down, the
machine should be turned off and no personnel
shall remain in the platform.
Do not modify or alter an aerial work platform
without prior written permission from the
manufacturer. Mounting attachments for holding
tools or other materials onto the platform, toeboards
or guard rail system can increase the weight in the
platform and the surface area of the platform or the
load.
SAFETY RULES
Fall Hazards
The guard rail system provides fall protection. If
occupants of the platform are required to wear
personal fall protection equipment (PFPE) due to
job site or employer rules, PFPE equipment and its
use shall be in accordance with the PFPE
manufacturer’s instructions and applicable
governmental requirements.
Do not sit, stand or climb
on the platform guard rails.
Maintain a firm footing on
the platform floor at all
times.
Do not enter or raise the
platform unless the
platform side guard rails
are locked upright and the
platform end guard rail and
the platform entry gate are
closed and latched.
Do not exit the platform while raised. If a power
failure occurs, have ground personnel activate the
manual lowering valve.
Keep the platform floor clear of debris.