Generac
®
Power Systems, Inc. 25
Section 2 – Installation
PRIMEPACT 50 and 70 (50Hz) Recreational Vehicle Generators
Figure 2.7 – Typical Noise Abatement
2.2.5 COMPARTMENT FLOOR CUTOUTS
You must provide openings in the generator compart-
ment for the following items (Figure 2.8):
• Engine exhaust and cooling air outlets
• Generator cooling air inlet
• Four holes for passage of generator mounting
bolts. See Section 2.1.4 (Page 23).
Fuel lines and exhaust piping must not pene-
trate into the vehicle living area.
◆
Figure 2.8 — Compartment Floor Cutout