Filter
Top Products
CIMPLICITY PMCS Read-This-Book-First Using MMS Servers with PMCS •
••
• 61
Preparing the MMS Server for use with PMCS
The following instructions describe how to set up your MMS Server for DDE access by
PMCS applications such as Event Logger and Waveform Capture. Both MMS Server and
PMCS must be properly installed before following these instructions.
1. Launch the AX-S4 MMS Configuration Program (Start > Programs > Sisco > AXS4
MMS > AXS4 MMS Configuration), and select Configure > Configuration > Network >
Addressing. This displays the Network Addressing window, shown below.
Choose New to start the wizard for creating a new host. The Host Name Wizard - Host Name
dialog box is displayed.