Filter
Top Products
CIMPLICITY PMCS Read-This-Book-First EPM Device- Special Considerations •
••
• 57
Adding Devices (Meters)
To add a meter, right-click on the Ethernet site you want to add the meter to, and
select Insert Device… from the pop-up menu. The Add Ethernet Device dialog box
appears (shown below).
Enter the following information:
• Choose the meter type from the Type list (Power Measurement 7700 ION).
• Type a name in the Group box, or choose a Group from the list (by default
the Group will be the name of the workstation).
• Enter a name for the meter (or accept the default). The meter name must
begin with a letter.
• Enter the IP address for the meter.
• Enter the IP Service Port number (socket) for the meter. For a 7700, 7600
and 7500 ION this number is 7700, for a 3720 ACM, 3721.
Saving and Exiting
Once you have added all of your sites and devices to the network tree, click the Save
button (or choose Save from the File menu), and exit Network Builder. You have
now configured your EPM 7700, EPM 7600 and EPM 7500 meters to operate with
the PMCS, and you should be able to access EPM 7700, EPM 7600 and EPM 7700
metering data from PMCS client applications.