Filter
Top Products
Trouble Shooting
TROUBLE PROBABLE CAUSE SUGGESTED REMEDY
1.Fan will not 1. Fuse or circuit breaker 1. Check main and branch
start. blown. circuit fuses or circuit breakers.
WARNING: Make sure
main power is turned off.
2. Loose electrical connections 2. Check that all electrical
to the fan or wall control. connections are secure.
3. Fan Wall Control is OFF. 3. Turn ON Fan Wall Control.
WARNING: Make sure main
power is turned off.
2.Fan sounds 1. Blades not securely attached 1. Attach blades to fan before
noisy. to fan. operating or tightening the blade
screws.
3.Fan wobbles 1. Fan blades are not seated 1. Check to be sure that the
excessively. into the blade flanges properly. flange and medallion bosses are
seated into the blade mounting
holes.
2. Fan blades are out of balance. 2. Follow the instructions of the
blade balancing kit supplied
with the ceiling fan to correct
the wobble.
9
Model No.: CF3400
1. Blades (see store or catalog).
Do not use water when cleaning your
ceiling fan. It could damage the motor or
the blades and create the possibility of an
electrical shock.
!
WARNING
The use of any other control not
specifically approved for this fan could
result in fire, shock and personal injury.
!
WARNING
This product is designed to use only
those parts supplied with this product
and/or any accessories designated
specifically for use with this product by
Emerson Electric Co. Substitution of
parts or accessories not designated for
use with this product by Emerson Electric
Co. could result in personal injury or
property damage.
!
WARNING
Maintenance
IMPORTANT CARE INSTRUCTIONS
for your Ceiling Fan
Periodic cleaning of your new ceiling fan is
the only maintenance that is needed.
When cleaning, use only a soft brush or
lint free cloth to avoid scratching the finish.
Abrasive cleaning agents are not required
and should be avoided to prevent damage
to finish.
Accessories
WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX
OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN.
!
!
!
BP7386, CF3400 Corsair 11/25/09 6:20 AM Page 9