Filter
Top Products
7. Insert the ceiling fan support cable from the fan through
the brass nut and reinstall the machine screw. Tighten
the machine screw securely (Figure 5). Be sure the steel
support cable is securely tightened before proceeding
with installation.
INSTALLATION NOTE: Check all fasteners and retighten
where necessary before continuing with the installation of
the ceiling fan.
8. To complete fan assembly, proceed to “How to Wire
Your Ceiling Fan” in the Ceiling Fan Instructions Manual.
Form No. BP7410
Part No. F40BP74100000 10/09
Air Comfort Products
DIVISION OF EMERSON ELECTRIC CO.
8100 W. Florissant • St. Louis, MO 63136
5. Install the assembled ceiling fan onto the mounting
bracket in accordance with the instructions provided with
the ceiling fan.
6. Unscrew the machine screw from the brass nut (supplied)
and feed the end of the ceiling fan support cable from the
ceiling fan downrod through the loop on the end of the
short steel support cable (Figures 4 and 5).
BRASS
NUT
MACHINE SCREW
CEILING FAN
SUPPORT
CABLE
MACHINE
SCREW
DRYWALL CEILING
ELECTRIC SUPPLY
WIRES OMMITED
FOR CLARITY
OUTLET BOX
SHORT STEEL
SUPPORT CABLE
BRASS NUT
CEILING FAN
SUPPORT CABLE
SHORT STEEL
SUPPORT CABLE LOOP
CEILING
COVER
CEILING FAN
SUPPORT CABLE
CEILING
COVER
HANGER BRACKET
HANGER BALL
SHORT STEEL UPPER SUPPORT CABLE
Figure 3
Figure 4
Figure 5