Filter
Top Products
www.elationlighting.com!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"T!!!!!!!!!!!!!!!!#$%$#!&'!()*!+,-.!/01203!456
Persnal - Stat Set - Addr DMX
Adjust the desired DMX address via an external controller, default is ON.
1 Access the main menu by pressing MODE/ESC.
2 Press the UP/DOWN buttons until “Persnal” is displayed and press ENTER.
3 Press the UP/DOWN buttons until “Stat Set” is displayed and press ENTER.
4 Press the UP/DOWN buttons until “Addr DMX” is displayed and press ENTER and
the display will show (=OFF, =ON).
5 Press the UP/DOWN buttons to select (=OFF or =ON) and press ENTER.
6 Press MODE/ESC to return to previous menu or display will automatically exit.
Persnal - Stat Set - NoDMXSta
Fixture runs in Auto Run if no DMX signal is detected. Options include (=Hold, =Auto,
=CloShut), default is =Hold.
1 Access the main menu by pressing MODE/ESC.
2 Press the UP/DOWN buttons until “Persnal” is displayed and press ENTER.
3 Press the UP/DOWN buttons until “Stat Set” is displayed and press ENTER.
4 Press the UP/DOWN buttons until “NoDMXSta” is displayed and press ENTER.
5 Press the UP/DOWN buttons to select desired value (=Hold, =Auto, =CloShut),
and press ENTER to confirm selection.
6 Press MODE/ESC to return to previous menu or display will automatically exit.
Persnal - Disp Set - Off Time
Shut off the LED display after 02 to 59 minutes, default is 05 minutes.
1 Access the main menu by pressing MODE/ESC.
2 Press the UP/DOWN buttons until “Persnal” is displayed and press ENTER.
3 Press the UP/DOWN buttons until “Disp Set” is displayed and press ENTER.
4 Press the UP/DOWN buttons until “Off Time” is displayed and press ENTER.
5 Press the UP/DOWN buttons to select desired value (=OFF, 02-59), and press
ENTER to confirm selection.
6 Press MODE/ESC to return to previous menu or display will automatically exit.