Dixon ZTR 5425 Lawn Mower User Manual


 
Page 44
SITUATION CAUSES REMEDY
Poor cut quality Ground speed Reduce mowing speed.
Poor cut quality Incorrect engine to Refer to page 40 for part numbers.
mower deck belt
Poor cut quality Engine RPM too low Increase engine RPM to maximum.
Poor cut quality Dull or bent blade Sharpen or replace as required.
Poor cut quality Un-level mower deck Refer to page 31 for deck leveling
procedure.
Poor cut quality Grass buildup under Clean out undersideofmowerdeck.
mower deck
Poor cut quality Improper blades Refer to page 40 for part numbers.
Poor cut quality Uneven tire pressures Refer to page 39 for correct tire
pressures.
TROUBLESHOOTING
MOWER CUT QUALITY:
There are many variables that can affect the cut quality of any riding mower. Type and conditions
of grass, cut height setting, engine RPM and ground speed are some of the variables that interact
creating differences in cut quality. Examination of one or more of the above will generally produce
a quality cut.
The Troubleshooting Chart suggests practices and adjustments that may be helpful in improving
cut quality. Your Dixon ZTR dealer is also available to provide assistance to you.