Filter
Top Products
Page 28
REAR
HANGER
PIN
BELT TENSION
ENGINE TO MOWER DECK BELT:
42" and 50" P/N 6111
60" P/N 6938
The engine to mower deck drive belts are automatically held in proper
tension by springs which push the deck assembly forward and do not
require any additional adjustment to be made.
MOWER DECK SERPENTINE BELT:
42" P/N 6109
50" P/N 1300
60" P/N 6939
Refer to illustration for adjustment procedure.
NOTE: Belt deflection or movement should be approximately 1/4" when
measured at mid-point between pulleys.
Periodically inspect both belt and idler systems.
CARE AND MAINTENANCE
TIGHTEN OR LOOSEN
HEX NUT TO ACHIEVE
THIS DIMENSION
50" & 60" 5/8"
42" 3/4"